Different Color Steel Lined PTFE Pipe Line Tee Standard Size

DESCRIPTION

• Working temperature is high at the range of -29°C-200°C; except the molten alkali metals, element fluorine and aromatic hydrocarbon, lined products can be used in any chemical medium.
• Vacuum resistance. In the range of -29°C-150°C, it is applicable for vacuum condition. In chemical production, the vacuum condition occurs due to cooling, longitudinal emissions, or medium backflow.
• High-pressure resistance. Within temperature working condition, it can sustain the working pressure of 3.0 MPa.
• Resistance to penetration. Adapt the high-quality PTFE, to make it of high density and enough thickness after advanced lining processing, make it excellent antiosmosis.
• PTFE advanced lining molding process achieved the status of syn chronous hot expansion or cold shrinkage for steel components and fluorine plastic.
• Adopts the standard size according to HG, GB, DIN, ANSI, and JIS etc., which improves interchangeability, to provide convenience for installation.

LINING PROCESSING SPECIFICATION

Product parameter:

Lining Material: PTFE

Nominal diameter: DN25~DN300,1"~12"

Length: ≤ 6000mm (size≤ DN150) ≤ 4000mm ( size> DN150)

Temperature range: -29°C~180°C

Applicable medium:

Able to transport any concentration of acid, alkali, organic solvents, strong oxidant, toxic and volatile, flammable chemicals.

PTFE lined pipes with shortest lengths are around 100mm depending upon nominal bore and the longest lengths is 6 meters for up to DN150 and 3 meters above this. Generally constructed from carbon steel pipe, and stainless steel is also popular for dangerous access area where there is the potential for external corrosion.

INFORMATION ABOUT OUR FACTORY

Our Service
1) Your inquiry will be replied within 2 hours during working time,Within 24hours when rest time.
2) Our working time is 7.30 AM --17:30 PM,Monday to Saturday.
3) General samples time can be arranged within 2--5days.
4) Orders will be produced exactly as request and approved samples.
5) When mass production,we send photos to show the production line.And confirm the estimate time again.
6) At the end of mass production,photos and samples will send to you for approval.You can arrange the inspection.
7) Before shipment,our QC will have inspection to make sure the quality.
8) We always try best to ensure every order to delivery in time.

Payment Terms
1) T/T,Cash,L/C.Weston Union
2) 30% deposit,70% balance before shipment.
3) Lead time: 15 days after received deposited for 2tons.
4) Delivery way: By sea,By air, By EMS,DHL,UPS,TNT,FedEx.

Zhenjiang Chunhuan Sealing Materials Co., Ltd (Group) is located in Yangzhong City, Jiangsu Province, China, Founded in 1985, after more than 30 years of continuous development, has become the production of fluorine plastic products scale backbone enterprises. Companies registered capital of 80.88 million yuan, with more than 8,000 yuan in fixed assets, 20,000 square meters of business premises, more than 200 workers.

Main products: PTFE molded tube, sheet, gasket, PTFE push, extrusion rod/ tube,PTFE skived sheet/film,PTFE filled products,Soft PTFE products,PTFE processing parts,Steel lining pipe fittings; Engineering plastics and Various metal seals, Metal sprial wound gasket; Fluorine rubber products, Gaskets, O-ring, oil seal etc.